3Com Switch 7757, Руководство по настройке, Страница: 291 / 940

Basic RIP Configuration 291
Basic RIP
Configuration
Configuration
Prerequisites
Before configuring basic RIP functions, perform the following tasks:
■
Configuring the link layer protocol
Configuring RIP Route
Control Setting the additional
routing metrics of an
interface Optional “Setting the
additional routing
metrics of an
interface” on page
293
Configuring RIP route
summary Optional “Configuring RIP
route summary” on
page 294
Disabling the receiving
of host routes Optional “Disabling the
receiving of host
routes” on page
294
Configuring RIP to filter
or advertise the received
routes Optional “Configuring RIP to
filter or advertise
the received
routes” on page
295
Setting RIP preference Optional “Setting RIP
preference” on
page 295
Enabling RIP traffic
sharing across interfaces Optional “Enabling RIP
traffic sharing
across interfaces”
on page 295
Configuring RIP to
import routes from
another protocol Optional “Configuring RIP to
redistribute routes
from another
protocol” on page
296
RIP Network Adjustment
and Optimization Configuring RIP timers Optional “Configuring RIP
timers” on page
297
Configuring split
horizon Optional “Configuring split
horizon” on page
297
Configuring RIP-1
packet zero field check Optional “Configuring RIP-1
packet zero field
check” on page
297
Setting RIP-2 packet
authentication mode Optional “Setting RIP-2
packet
authentication
mode” on page
297
Configuring a RIP
neighbor Optional “Configuring a RIP
neighbor” on page
298
Table 213 RIP configuration tasks
Configuration Task Description Related section