Installing in the Single-Wide 8-Slot Chassis
1-23
11
Place the bracket containing the floppy disk drive and the flash memory drive in
the chassis.
The bottom of the bracket has three turret pins. These pins engage three
keyhole slots located on the bottom of the chassis.
a
Slip the turret pins into the wide part of the keyhole slots.
b
Slide the bracket toward the front of the chassis until it is flush with the
chassis.
c
Secure this bracket with the retaining screw from the front of the chassis.
Both the screw and the pins lock the bracket in place.
As you place the floppy disk drive and flash memory drive into the chassis, you
can compress the ribbon and power cables against the backplane.
12
Insert the flash memory card (purchased separately).
The flash memory card is keyed so that it can only be installed with the
company name facing up.
13
Connect the ribbon cable and the power cable to the backplane.
Front panel
INSERT THIS WAY
Install flash memory
card into the TOP slot
of 68-pin connector on
flash memory drive.
INSERT THIS WAY
FLASH
FLASH
Front panel
INSERT THIS WAY
Attach ribbon cable and power cable
to connectors on backplane.
Backplane
INSERT THIS WAY
FLASH
FLASH
Red line
