Installing in the 4-Slot Chassis
1-9
8
Attach the ribbon cable to the backplane and the power cable to the power
supply cable.
9
Insert the flash memory card (purchased separately) into the flash memory drive.
The flash memory card is keyed so that it can only be installed with the
company name facing up.
10
Plug the power cord into the chassis.
CAUTION:
Verify that the power switch is in the off (O) position.
Power supply
Front panel
Backplane
S/N IBPXXXX
Connector C
Connector F
Red
line
Attach connector F
of power cable to
power supply cable.
a
Attach connector C of
ribbon cable to 34-pin
connector on backplane.
b
Front panel
INSERT THIS WAY
Install flash memory
card into the TOP slot
of 68-pin connector on
flash memory drive until
it snaps into place.
INSERT THIS WAY
FLASH
FLASH
