A
BOUT
T
HIS
G
UIDE
Introduction
This guide describes how to install the flash memory drive in all NETBuilder II®
systems. The flash memory drive uses Personal Computer Memory Card International
Association (PCMCIA) standard 1.0 flash memory cards, purchased separately. Refer to
the release notes for approved vendors of the flash memory card.
This guide is intended for the system administrator, network equipment installer, or
network manager who is responsible for installing and managing the network
hardware. It assumes a working knowledge of network operations, but does not
assume prior knowledge of 3Com® internetworking equipment.
If the information in the release notes shipped with your product differs from the
information in this guide, follow the release notes.
Conventions
Table 1 and Table 2 list conventions that are used throughout this guide.
Table 1
Notice Icons
Icon
Type
Description
Information Note Information notes call attention to important features or
instructions.
Caution
Cautions alert you to personal safety risk, system damage,
or loss of data.
Warning
Warnings alert you to the risk of severe personal injury.
