3Com NBX, Руководство по установке

Страница: 197 / 248

Servicing the Network Call Processor Battery 197
4 Configure the connection to use the serial port to which you connected
the cable and to use the settings in
Table 38 .
All messages that associated with the board (for example, the
initialization process) appear in the terminal emulation window.
CLI Commands
The command
nbxIpConfig
provides a simple way to set the static IP
address settings required by the NCP and other NBX devices. For any
other purpose, 3Com recommends that you use the command line
interface only under the direction of an authorized service technician.
Servicing the
Network Call
Processor Battery
If you lose the system date and time when you reboot an NBX system, it
could mean that the NCP battery must be replaced. The battery is not a
user-serviceable item. If you suspect a problem with the battery, contact
your 3Com Technical Support representative.
WARNING: There is a danger of explosion if the battery is incorrectly
replaced. Replace only with the same or equivalent type recommended
by the manufacturer. Dispose of used batteries according to the
manufacturer’s instructions.
Getting Service and
Support
Your authorized 3Com NBX Voice-Authorized Partner can assist you with
all of your support needs, including systems and cable plant design,
installation, configuration, and project management.
A choice of maintenance services, including remote diagnostics, on-site
support, telephone technical support, and hardware replacement, is
available from your 3Com NBX Voice-Authorized Partner. Training and
enhancement services are also available.
Table 38 Terminal Emulation Program Properties
Property Value
Emulation VT100
Baud Rate 9600
Data bits 8
Parity None
Stop bits 1
Flow control None