manualshive.com logo in svg

3Com NBX, Руководство по установке

Поделиться
Скачать
3Com NBX Скачать руководство пользователя страница 167

Adding a Legacy Link Card to an NBX System

167

that the card can supply line power to the phones through the telephone 
wiring.

Adding a Legacy Link Card to a system requires these steps:

■

Prerequisites for Installing a Legacy Link Card

■

Enabling Auto Discover for Legacy Link Cards

■

Installing the Legacy Link Card

■

Configuring a Legacy Link Card

■

Upgrading Legacy Link Card Software

Prerequisites for

Installing a Legacy

Link Card

Before you install the card, verify that all prerequisites in this section are 
met:

■

Be sure to read and comply with the Safety Information in the 
Statutory Warnings Section of the Analog Approvals document on the 
3Com Partner Access web site. Be sure to communicate the safety 
information to users and administrators of the NBX system in which 
the card is operating.

■

The 3Com Legacy Link Card must be installed by a 3Com 
Voice-Authorized Reseller.

■

The NBX system must have at least one spare card slot.

■

If you will be installing the card in a V5000 Gateway Chassis, ensure 
that all uplinks are using the 10/100M switched ports. Do not use the 
10M shared ports.

■

You must use NBX software Release 4.1.6x or later, and you must 
install a license for the correct number of Legacy Link cards.

■

An AC mains power point (preferably UPS-protected) must be within 5 
feet of the installed card.

■

You need an RJ21x (25-pair/50-way female Amphenol-type) connector 
to connect to the 50-way male connector on the card for the 
telephones.

■

You must wear a connected and grounded anti-static wrist strap with 
the grounding lead in operation.

Содержание NBX

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды