3Com NBX, Руководство по установке

Страница: 137 / 248

Adding a 3Com Attendant Console 137
To associate an Attendant Console with a specific telephone:
1 Login to the NBX NetSet utility as administrator and click Telephone
Configuration > Attendant Console.
2 Click the extension number of an Attendant Console in the list to open
the Modify page and then select a telephone from the list.
Verifying Extension
Assignments on an
Attendant Console
After you Auto Discover an Attendant Console, you can verify which
telephone extensions have been mapped to the Attendant Console
buttons.
To verify the extension assignments:
1 Login to the NBX NetSet utility as administrator and click Telephone
Configuration > Attendant Console.
2 Click the extension number of an Attendant Console in the list to open
the Modify page.
3 Make sure the correct extension is selected and then and then click the
Button Mapping tab.
For more about button mappings on an Attendant Console, see
Chapter 3, “Device Configuration,” in the
NBX Administrator’s Guide.
Attendant Console
Labels
You can create and print Attendant Console labels using the NBX
LabelMaker utility. To download the LabelMaker utility:
1 Log into NBX NetSet as an administrator.
2 Click Downloads > LabelMaker .
After you print the labels and then cut them out, remove the plastic cover
from the Attendant Console and install the labels. On the 3Com 3105
Attendant Console, remove the cover by pulling up on the two tabs at
the top of the Attendant Console until the top of the cover pops off.