3Com NBX, Руководство по установке

Страница: 152 / 248

152 C
HAPTER
6: BRI-ST D
IGITAL
L
INE
C
ARD
Verifying a BRI-ST
Digital Line Card
After you Auto Discover a BRI-ST Digital Line Card, you can verify that it
was properly discovered by using the NBX NetSet utility, described next,
or by viewing the card’s status lights, which is described later.
Using the NBX NetSet
Utility
To verify that the BRI-ST card has been properly discovered:
1 Log in to the NBX NetSet utility using the administrator username and
password.
2 Click the
Click
PSTN Gateway Configuration > Digital Line Cards
.
3 Examine the list of Digital Line Cards to find the BRI-ST board with the
correct MAC address. The
Type column should contain BRI and the Status
column should contain Ready .
4 Click the MAC address for the card to open the Modify page.
5 In the Channel List, click each entry to view that channel’s status and
verify that the each channel has an extension number.
6 Verify that the Status column contains Ready for each channel.
You can also use the status lights on the front of the card to verify that a
BRI-ST Digital Line Card has been properly discovered. See
page 43 for
details about BRI-ST card status lights.
You are now ready to configure the ISDN BRI-ST Digital Line Card. See
Chapter 3, “Device Configuration,” in the
NBX Administrator’s Guide .