3Com LINKBUILDER 3C18500 Скачать руководство пользователя страница 27

Страница: 27 / 242

The Management Module

DUA1850-0AAA05

Out-of-Band management. Contact your supplier for news about this

feature.

Functions of the Management Module

The management module provides a view of the MSH chassis with

regard to configuration and common areas of control. It also manages

the Ethernet connections, Token Ring modules and some aspects of

intelligent modules contained in the chassis.

It performs management operations, automatically or at the request of

a user, to:

■

Maintain an inventory of the modules in the chassis.

■

Control the configuration of modules.

■

Monitor performance.

■

Report or act on specific events as they happen.

The Inventory

All modules which are in place in the chassis provide details of their

types and versions to the management module. Any changes in the

number and type of the modules inserted are automatically notified

also.

Configuration of Modules

Full control of the modules is available. Modules may be allocated or

re-allocated to a service as desired. Ports may be enabled or disabled.

Resilient pairs of ports can be created to provide automatic re-routing if

a module fails.

Performance Monitoring

Distributed RMON

available through the management module over

ethernet networks. To use RMON over token rings, you need a Token

Ring RMON Probe (3C18250). S

ets of statistics are collected from smart

modules. As the network manager, you can view statistics and follow

the details of how the networks are behaving. Using the control

functions described above, you are able to re-configure a network.

Содержание LINKBUILDER 3C18500



















































































































































































































































Результаты поиска

Содержание LINKBUILDER 3C18500

Отзывы:

Похожие инструкции для LINKBUILDER 3C18500

Бренды по названию

Популярные бренды

3Com LINKBUILDER 3C18500, Руководство пользователя

Результаты поиска

Содержание LINKBUILDER 3C18500

Отзывы:

Похожие инструкции для LINKBUILDER 3C18500

Бренды по названию

Популярные бренды