Troubleshooting
6-6
If you want to run the tests continuously, go to the
Repetitions box on the Test Setup screen shown in
Figure 6-5, and select Continuous (and deselect Halt
on Error in the Errors box). The tests will continue
to run until you abort them. Refer to the section
“Changing the Test Setup” for more information.
Changing the Test Setup
If you want to change the test parameters, follow
these steps:
1. Choose Test Setup from the Test menu in the
main window or use the <Test Setup> command
button in the Run Tests dialog box.
The Test Setup dialog box appears, similar to the one
shown in Figure 6-5.
Figure 6-5. Test Setup Dialog Box
