Quick Start
7
Changing 3C529 Adapter Options
This procedure is only required if you want to change the
Network Driver Optimization or Maximum Modem
Speed settings. If you do not want to change these
settings and you accept their default values, go to the
section “Connecting to the Network.” To configure the
3C529 adapter, follow these steps:
1. Make sure that you have booted the computer
under DOS.
2. Place the EtherDisk
®
diskette in the floppy drive
on your computer and make that drive the
current drive.
3. Type at the prompt:
INSTALL [Enter]
4. The first time you use the diskette to install an
adapter, a license screen appears. To accept the
terms and conditions of the 3Com end-user
software license agreement, type the following:
Y
NOTE: To view the full text of the license
agreement, press [F1].
5. Read the screen and press [Enter].
6. When the main menu screen appears, select
Configuration/Diagnostic/Troubleshooting and
press [Enter].
