3Com BETA, Руководство по началу работы

Страница: 35 / 70

Chapter 4. Network Configuration
Name
Enter a name for the group of computers. You can use this name when you change config-
uration on the pages mentioned above. A group can consist of several rows of IP addresses
or series of IP addresses. By clicking on the plus sign beside the name, you add more rows
where you can specify more IP addresses for this group.
Subgroup
An already defined group can be used as a subgroup to new groups. Select the old group
here and leave the fields for
DNS name empty. Select ’-’ as Interface . If you don’t want to
use a subgroup, select ’-’ here.
Lower Limit
DNS Name Or IP Address
Enter the DNS name or IP address of the network or computer. For computers in an IP range
that you want to give a network name, enter the first IP address in the range.
DNS Name Or
IP Address
must not be empty if you are not using a subgroup.
IP address
The IP address of the object you entered in the DNS Name Or IP Address field is displayed
here. This field is not updated until you click on
Look up all IP addresses again
or make
changes in the DNS Name Or IP Address field.
27