3Com BETA Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 70

background image

Chapter 4. Network Configuration

Physical device

Physical device

tells the physical device name of the network interface.

Status

Specify if this network interface is

On

or

Off

. If the interface is off, all configuration on

this page is ignored, and the Telecommuting Module will behave as if this interface wasn’t
present.

Interface name

The network

Interface name

is only used internally in the Telecommuting Module, e. g.

when configuring

Networks and Computers

.

Obtain IP Address Dynamically

Specify if this network interface should obtain its IP address from a DHCP or PPPoE server
instead of an address entered on this page. If

DHCP client ON

is selected, the Telecommut-

ing Module will send out a DHCP request when you apply the configuration and at boot. The
request is sent out to the network connected to this interface. If no IP address is obtained,
the Telecommuting Module will keep on sending requests until an address lease is received.

The Telecommuting Module will accept an IP address and a netmask via DHCP. It will also
accept a default gateway, if you configured for that in the

Main Default Gateways

table on

the

Default Gateway

page.

If

PPPoE client ON

is selected, the Telecommuting Module will send out a PPPoE request

when you apply the configuration and at boot. To obtain an IP address via PPPoE, you also
need to enter configuration on the

PPPoE

page.

More than one interface can obtain its IP address dynamically.

Directly Connected Networks

The Telecommuting Module must have an IP address on every network to which it is directly
connected. This applies to all networks on the same physical network to which this interface
is connected.

When the DHCP client is on, there must be a directly connected network with "*" as the

DNS name/IP address

, and where the

Netmask/bits

field is left empty. No other directly

connected networks are allowed for this interface.

20

«
...
26
27
28
29
30
...
»

Содержание BETA







































































Отзывы:

Нет отзывов

Похожие инструкции для BETA

Бренд: Unipulse Страницы: 99

Бренд: Accutrol Страницы: 25

Бренд: Mainpine Страницы: 16

Бренд: Danfoss Страницы: 20

Бренд: Gardigo Страницы: 8

Бренд: Gardigo Страницы: 19

Бренд: Zamel Страницы: 2

Бренд: Zamel Страницы: 2

Бренд: Zamel Страницы: 2

Бренд: Valcom Страницы: 3

Бренд: Valcom Страницы: 3

Бренд: Valcom Страницы: 2

Real Living iM1

Бренд: Yale Страницы: 2

Бренд: Elby Designs Страницы: 4

SUPERSTAR E-3000/F2

Бренд: praher Страницы: 10

Бренд: IDEC Страницы: 97

Бренд: Ros Страницы: 10

Бренд: Zencontrol Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды