3Com BETA Скачать руководство пользователя | Manualshive

Страница: 20 / 70

background image

Chapter 3. Installing 3Com VCX IP Telecommuting Module

If the network or partial network is not directly connected to the Telecommuting Module,
you must enter the IP address of the router leading to that network. Then enter the network’s
address and mask.

Static routing:
The network allowed to configure from is not on a network local to this
unit. You must configure a static route to it. Give the
IP address of the router on the network this unit is on.

The IP address of the router [0.0.0.0]:

10.47.3.1

Network address [10.47.0.0]:

10.10.0.0

Netmask [255.255.255.0]:

Then enter a password.

Password []:

Finally, you are asked if you want to reset other configuration.

Other configuration
Do you want to reset the rest of the configuration? (y/n) [n]

If you answer

n

, nothing is removed. If you answer

y

, you have three alternatives to select

from:

1. Clear as little as possible. This is the alternative that is used if you answer

n

to the

question above. Both the preliminary and the permanent configurations will be updated
with the configuration specified above.

2. Revert to the factory configuration and then apply the configuration specified above.

This will affect the permanent but not the preliminary configuration.

3. Revert to the factory configuration and empty all logs and then apply the configuration

specified above. Both the preliminary and the permanent configurations will be affected.

Select the update mode, which is what you want to remove.

Update mode (1-3) [1]:

All configuration is now complete. The installation program shows the configuration and
asks if it is correct.

yes saves the configuration.

no runs the installation program over again.

abort ends the installation program without saving.

Now, eject the diskette from your PC and insert it into the Telecommuting Module’s floppy
drive. Then power up the Telecommuting Module and wait for it to boot. Then, finish con-
figuration of the Telecommuting Module from the computer/computers specified in the in-
stallation program.

12

«
...
18
19
20
21
22
...
»

Содержание BETA







































































Отзывы:

Нет отзывов

Похожие инструкции для BETA

Бренд: E-fly Страницы: 16

Бренд: Ransburg Страницы: 49

Бренд: Balboa Страницы: 2

Бренд: Badger Meter Страницы: 20

Бренд: NEC Страницы: 149

Бренд: NEC Страницы: 13

Бренд: Manfrotto Страницы: 16

Бренд: GBD Страницы: 15

Бренд: Samson Страницы: 78

Бренд: UNICORECOMM Страницы: 32

Бренд: UNICORECOMM Страницы: 7

Бренд: UNICORECOMM Страницы: 26

Бренд: UNICORECOMM Страницы: 25

Z1000 CIMR-ZU*A Series

Бренд: YASKAWA Страницы: 340

Бренд: ETC Страницы: 8

Бренд: Telit Wireless Solutions Страницы: 45

Бренд: YOKOGAWA Страницы: 33

Бренд: Rain Bird Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды