3Com 400 Family, Руководство по настройке

Страница: 249 / 344

Logging Function 247
Figure 68 Turn on/off the Information Synchronization Switch in Fabric
Sending the Information
to Loghost
To send information to the loghost, follow the steps below:
1 Enabling info-center
Perform the following operation in System View.
Table 279 Enable/Disable Info-Center
Info-center is enabled by default. After info-center is enabled, system
performances are affected when the system processes much information because
of information classification and outputting.
2 Configuring to output information to loghost
Perform the following operation in System View.
Table 280 Configuring to Output Information to Loghost
Ensure to enter the correct IP address using the
info-center loghost
command
to configure loghost IP address. If you enter a loopback address, the system
prompts of invalid address appears.
3 Configuring the information source on the Switch
With this command, you can define the information that is sent to the control
terminal, such as: generated by which modules, information type, information
level, and so on.
Perform the following operation in System View.
Device Configuration Default Value
Configuration
Description
Switch
Enable info-center By default, info-center is
enabled. Other configurations are
valid only if the
info-center is enabled.
Set the information
output direction to
SNMP By default, Switches of master
log in Fabric, debugging and trap
information synchronization are
turned on, so as log and strap
information synchronization
Switches in other Switches. This configuration can
keep log information,
debugging information
and trap information in
Fabric in every Switch
synchronized.
Operation Command
Enable info-center
info-center enable
Disable info-center
undo info-center enable
Operation Command
Output information to loghost
info-center loghost host-ip-addr [
channel {
c
hannel-number | channel-name }
] [ facility local-number ] [ language {
chinese | english } ]
Cancel the configuration of
outputting information to loghost
undo info-center loghost host-ip-addr