background image

1

The 3Com NJ205 is part of the IntelliJack family of products that 
provides connectivity at the edge of the network infrastructure. 

The NJ205 IntelliJack is a 4-port, un-managed Fast Ethernet 
switch that fits into most standard data port openings.

The NJ205 IntelliJack quadruples port connections where a single 
port (and cable) already exists in the wall. Expanding port 
connections with the 3Com IntelliJack is a less expensive and less 
disruptive alternative to running additional cabling. Also, the 
3Com IntelliJack is installed in the wall, making it more secure 
and out of the way than deploying a remote desktop switch.

The NJ205 IntelliJack allows up to four networking devices, such 
as computers, printers, Voice over IP (VoIP) telephones, and 
scanners, to be connected to the network via its own Ethernet 
port. A pass-through port is provided that allows an additional 
device to be connected to a separate network segment through 
the same IntelliJack.

All ports feature 10/100 Mbps auto-negotiation, which 
configures the NJ205 IntelliJack for 10 Mbps or 100 Mbps 
connections automatically.

The NJ205 needs no software to operate and no configuration. 
However, to modify the default configuration and utilize the 
advanced feature we have provided a configuration manager 
software suite on compact disk. 

1

About the NJ205 IntelliJack

Содержание 3CNJ205





























































































Отзывы: