manualshive.com logo in svg

3Com 3CBLSG48, Руководство пользователя, Страница: 89 / 231

Поделиться
Скачать
3Com 3CBLSG48 Скачать руководство пользователя страница 89

C

HAPTER 

4: M

ANAGING

 D

EVICE

 S

ECURITY

8

The

 ACL Binding Setup Page 

contains the following fields:

 

Select Port(s)

 — Indicates the ports to be configured. 

 

 

Select All 

— Allows the user to assign the ACL to all ports.  

 

 

Select None 

— Removes the ports selected. 

 

 

Bind ACL

 — Assigns an Access Control List to a port or LAG. 

 

 

MAC-based ACL 

— Displays the MAC based ACL to which the  

 

 

interface is assigned. 

 

 

IP-based ACL 

— Displays the IP based ACL to which the inter 

 

 

face is assigned. 

 

 

Select ACL 

— Contains a list of previously defined Access Control  

 

Lists to which the port or LAG can be bound. To bind an ACL to a  

 

LAG, the ACL should be bound to its port members.

 

Define the relevant fields.

 

Click 

Apply

. ACL Binding is defined, and the device is updated.

Содержание 3CBLSG48








































































































































































































































Отзывы:

Нет отзывов