manualshive.com logo in svg

3Com 3CBLSG48, Руководство пользователя

Поделиться
Скачать
3Com 3CBLSG48 Скачать руководство пользователя страница 78

C

HAPTER 

4: M

ANAGING

 D

EVICE

 S

ECURITY

Add Rules to ACL

 

Priority

 — Defines the ACL priority. ACLs are checked on the first  

 

fit basis. The ACL priority defines the ACL order in the ACL list.

 

Protocol 

— Indicates the protocol in the ACE to which the packet  

 

is matched. The possible fields are: 

 

 

Select from List

 — Selects a protocol on which ACE can be  

 

 

based. 

 

 

Protocol ID 

— Select a protocol ID from a list on which ACE  

 

 

can be based.

 

Source Port

 — Indicates the source port that is used for matched  

 

packets. Enabled only when TCP or UDP are selected in the   

 

Protocol list. The field value is either user defined or Any. If Any is  

 

selected the IP based ACL is applied to any source port.

 

Destination Port 

— Indicates the destination port that is used  

 

for matched packets. Enabled only when TCP or UDP are selected  

 

in the Protocol list. The field value is either user defined or Any. If  

 

Any is selected, the IP based ACL is applied to any destination port.

 

TCP Flags 

— If checked, enables configuration of TCP flags  

 

matched to the packet. The possible fields are: 

 

 

Urg 

— Urgent pointer field significant. The urgent pointer  

 

 

points to the sequence number of the octet following the  

 

 

urgent data. 

 

 

Ack

 — Acknowledgement field significant. The   

 

 

 

acknowledgement field is the byte number of the next byte  

 

 

that the sender expects to receive from the receiver. 

 

 

Psh 

— Push (send) the data as soon as possible, without  

 

 

buffering.This is used for interactive traffic. 

 

 

Rst

 — Reset the connection. This invalidates the sequence  

 

 

numbers and aborts the session between the sender and  

 

 

receiver. 

 

 

Syn

 — Synchronize Initial Sequence Numbers (ISNs). This is  

 

 

used to initialize a new connection. 

 

 

Fin

 — Finish. This indicates there is no more data from the  

 

 

sender. This marks a normal closing of the session between the  

 

 

sender and receiver. 

Содержание 3CBLSG48








































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды