Configuring the DynamicAccess LAN Agent
59
Configuring the Dynamic
Access
LAN Agent
Consult your system administrator about using Dynamic
Access
technology at your site.
The instructions in this section are for configuring the Dynamic
Access
LAN agent on a
local PC. You can obtain the complete configuration instructions by accessing the
3Com
DynamicAccess Technology User Guide
on the
EtherCD.
To configure the Dynamic
Access
LAN agent on a local PC:
1
Double-click the 3Com Dynamic
Access
icon in the Windows Control Panel.
The Traffic Prioritization tab of the Dynamic
Access
Setup screen appears.
2
Select the tab containing the information you want to configure.
Traffic Prioritization
— Allows you to prioritize applications, which can ease
bottlenecks in your network and allow critical applications to take network
precedence.
Fast IP
—Allows you to enable and configure Fast IP.
Administration
—Allows you to set Dynamic
Access
control panel access, set VLAN
options, enable efficient multicast control, and enable the prioritizing of traffic.
Removing the Dynamic
Access
LAN Agent
For instructions on removing the Dynamic
Access
LAN agent from your PC, refer to the
DynamicAccess Software User Guide
. This user guide can be accessed on the
EtherCD
.
NOTE:
The DynamicAccess LAN agent configuration instructions are intended for
network administrators who have experience installing software and using
management tools for an Ethernet network.
NOTE:
For specific instructions on configuring any of the DynamicAccess
technology options, click
Help
on the 3Com DynamicAccess screen or go to:
http://www.3com.com/dynamicaccess