manualshive.com logo in svg

3Com 3C905CX, Руководство пользователя, Страница: 16 / 80

Поделиться
Скачать
3Com 3C905CX Скачать руководство пользователя страница 16

2      

Installing and Connecting the NIC

10

Installing Multiple NICs

If you are installing multiple 3Com NICs in a PC or server, follow the instructions in 
“Installing Multiple NICs” on page 25. 

Updating the Network Driver and NIC Software

If you already have a 3Com NIC installed and want to update the driver and/or NIC software, 
follow the instructions in “Updating the Network Driver and NIC Software” on page 24.

Installing From Diskette

If your PC does not have a CD-ROM drive, access a PC that has a CD-ROM drive and 
create 

installation

 diskettes from the 

EtherCD

. For instructions, see “Installing From 

Diskette” in Appendix D.

Running the Preinstallation Program for Windows 95/98

This section applies to Windows 95 and Windows 98 operating systems only.

If you are running Windows 2000, Windows XP, Windows Me, or Windows NT 4.0, go to 
“Inserting the NIC in the PC” on page 11 to begin the installation.

Before you physically install the NIC in a Windows 95 or 98 PC, run the NIC preinstallation 
program to properly set up your system environment. The preinstallation program prevents 
conflicts between the NIC and your operating system. It guides you through the NIC 
installation and 

must be run before

 you physically install the NIC in the PC.

To run the NIC preinstallation program:

1

Do not install the NIC in the PC.

2

Turn on the power to the PC and start Windows.

3

Quit any open applications and disable the automatic protection feature of any anti-
virus software that may be running.

4

Insert the 

EtherCD

 in the CD-ROM drive.

The 

EtherCD

 Welcome screen appears. If the 

EtherCD 

Welcome screen does not appear, 

enter the following command from the Run option of the Windows Start menu:

d:\installs\setup.exe

where d:\ represents the letter name of the CD-ROM drive.

5

Click 

NIC Software

.

6

Click 

NIC Drivers and Diagnostics

.

7

Click 

Install NIC Driver

.

■

To install the network driver and the 3Com NIC Diagnostics program, click 

Install with Diagnostic Program.

■

To install the network driver only, click 

Install without Diagnostic Program

.

Files are copied. Do not continue until a message box appears, stating that the 
installation is complete.

8

Click 

OK

.

9

Select your operating system to continue the installation.

The Completing NIC Installation screen appears. 

Содержание 3C905CX

















































































Отзывы:

Нет отзывов