Gateway Installation and Support Guide
16
Appendix E: Back-Up Key Codes
In most cases, you will receive a key code from your ISP. This key code is used to activate the 2Wire
gateway. If you did not receive a key code, you can use the key codes provided in the following table.
If your Internet Service Provider gave you a PPPoE
username and password to set up your Internet
connection, your broadband connection uses Point-
to-Point Protocol over Ethernet and you should use
this key code.
52EU-2374-6262-22AS-B22Y
If your Internet Service Provider assigned you an IP
address to set up your Internet connection, your
broadband connection uses static IP (Internet
Protocol) and you should use this key code.
52EU-2374-2E66-22AS-B2TW
If your Internet Service Provider did not provide you
with a user name, password, or IP address to set up
your Internet connection, your broadband
connection most likely uses DHCP (Dynamic Host
Configuration Protocol) and you should use this key
code.
52EU-2374-2262-22AT-B222
