Funk-Electronic Piciorgros GmbH
DVI-100 User Guide
V1.01 page
8
of 2
4
2
Access the embedded Web server
The whole configuration is done by accessing the internal web server of the DVI-100
and changing certain parameters using the user-friendly interface. The first to do is to
integrate the device into the local network. The network is supposed to use addresses of
the type 192.168.0.xxx.
The DVI-100 itself is available at the address 192.168.0.199. It must be sure that the
network has the right range of addresses and there is no other device with this address
connected to the network.
Accessing the interface the first time, a username and a password are required. The
login is registered to the name 'user' and the password 'user'. The password can be
changed as one of the following steps.
In registered state the user can see a menu on the left hand side, a content window on
the right and a footer containing selected information on the bottom.
