47
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Others
PIN
– PIN code for the SIM cards that request the PIN code.
End of dialling (empty=off)
– a selectable DTMF code for DTMF dialling end in
the event of a DISA incoming call. The default value is '#'.
VoIP parameters
VoIP functions
Day of deleting statistics on VoIP (every month)
– the day of automatic
deletion of call statistics on the VoIP interface. None = no deletion.
SIP protocol settings
Use CLIP from INVITE field
– the CLIP as set in the
or
field will
Contact
From
be used for routing calls into GSM/UMTS networks.
Send 180 ringing instead of 183 session progress.
Send 200 OK instead of 180/183.
Send 200 OK and BYE when rejected from GSM.
Send 200 OK on REGISTER request
– virtual registration of the device in
2N
®
(necessary for registration-requiring equipment).
VoiceBlue Next
Replace CLIP from GSM with Caller ID.
Deny DTMF according to RFC2833.
Forward DTMF for ME (Mobility Extension).
SIP registration
Registration expires [s]
– the timeout after which the
2N VoiceBlue Next
®
registration data expire at the SIP Proxy.
Reattempt registration [s]
– time interval for re-sending the request.
Registration domain (realm).
Caller ID.
Username
– registration data for the SIP Proxy.
Password
– registration data for the SIP Proxy.
Tip
The
and
functions can be
SMS at no answer
Follow me
enabled/disabled using the above mentioned DTMF codes by calling the
GSM gateway from a registered mobile user phone. The values of these
functions can be changed using the configuration interface too (see
below).
Caution
A SIM card with a PIN code other than that set in the GSM gateway
configuration will be blocked with the 'pin-err' cause. To unblock the
so-rejected SIM card, enter the correct PIN on your mobile phone!
