70
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Add record
Disabled
– enable/disable the selected routing rule.
Message from SMS group
– select the SMS group that receives the SMS.
Action type
– select the action for the received SMS:
Autoclip routing
– the incoming SMS will be routed according to the
AutoCLIP table records.
Deliver to user
– the SMS will be delivered to the selected user.
Drop message
– the SMS will be dropped.
Deliver to user
– select the SMS addressee. This option is valid only if
Action
is selected.
type = Deliver to user
Time limitation
– set the rule validity time.
Days limitation
– set the days in a week on which the rule shall be valid.
Clip mask
– set the filter for the SMS sender telephone number (CLIP). If the
selected mask matches the CLIP, the SMS will be routed according to the rules
set above. If not, the SMS will be dropped. The character replaces any string of
*
characters (789789789=789*, e.g.). The character replaces any character
?
(789789789=789??????, e.g.).
Text begin
– set the string to be matched against the SMS text beginning. If a
match is found, the SMS will be routed according to the rules set above.
Outgoing SMS routing
This section helps you define the outgoing SMS routing rules, which are included in the
outgoing SMS routing table.
Note
The rules are applied to incoming SMS sequentially, starting from the first
rule. If all the set rules are met in a row, the SMS is routed according to
the row.
Sending SMS depends on the outgoing routing rules set in
Messaging /
and limits defined in
User group / Outgoing SMS routing
Gateway /
. When the limits get
Gateway configuration / GSM outgoing group
exhausted, the SMS will be stored in the outgoing SMS database until the
set limits are restored.
