2N SingleTalk, Руководство пользователя

Страница: 52 / 73

2N® SingleTalk Programming
3.1
51
Function Number and Name Value Range Initializa-
tion Value Value Programmed
by You Notes, Explanations
915 – hang-up timeout
between calls
5–99
corresponds to
0.5 to 9.9 s
40 = 4 s
916 – CANCEL input inversion 0 or 1 0
0 = contact closed (or voltage
present) at open door
1= contact closed (or voltage
present) at closed door.
931 – microphone trigger level 0–3 2 0 = maximum microphone sensitivity
932 – automatic response speed 0–3 2 3 = maximum response speed
933 – receiving volume 0–15 7 15 = maximum receiving volume
934 – transmitting volume 0–15 7 15 = maximum transmitting volume
935 – message volume 0–15 7 15 = maximum message volume
936 – beep volume 0–12 12 12 = maximum tone volume
937 – DTMF hearing volume 0–3 3 3 = max. DTMF hearing volume
938 – loudspeaker volume 0–15 7 15 = max. loudspeaker volume
954 – count of ringing periods 1–99 10
962 – min. button pressing time 01–99
1 = 0.1 s
change
Applies to all buttons.
971 – count of message
repetitions
0–9 3 messages
The first message starts immediately
after the dialing is terminated. You
cannot talk during messages!
972 – message recording –
maximum length of 30
seconds
Service
password
Message text: The text is recommended to
include the lift address.
974 – lift identification 16 digits – Enables lift identification
975 – message options 2 digits 55
1st digit = type of message
repeated after dialing. 2nd digit =
message type after confirmation.
Both digits has these options:
1 = user recrded message
2 = identification (974) spelled
3 = combination of options 1+2
4 = identification (974) by DTMF
5 = message selected by par. 977
(after confirmation par. 976)
6 = combination of options 5+2
7 = confirming tone (after
confirmation only)
976 – call end message
language selection
0–9 1
0 = 1 = English
2, 3 = 4 = German
5 - 7 = 8 = Portuguese
9 = Dutch 10...99 = silence
Note: see Survey of messages in
chapter 4.2
977 – outgoing call message
selection
0–9 1
981 – checking call 0= off
1 = on
0 You can set for parameter 981:
1 = on, first call in 1 minute
2 = on, first call in 2 hours
3 = on, first call in 3 days
991 – service password up to 16 digits 12345