2N Netstar, Руководство пользователя

Страница: 236 / 282

236
Tones
Use this tag to define the basic tones of the PBX to be played to the calling user. The
menu is divided into three parts. The first part,
, helps you set various dial tones, Dial
the second part, , helps you set various alert tones and the third part, Alert
, helps you set various congestion tones. To add a row defining which tone Congestion
would be used for which situation use the context menu. A list of situations (states)
related to specific types of tones is displayed in the
column. A list of available Type
progress tones is displayed in the column. It holds true for the dial tones that a Tone
higher row has a higher priority. It is because there may be more valid conditions than
one in the dial tones. To change the priority of the rows, use the two arrow buttons on
the right. To add a row with a certain priority easily use the
an Insert ahead selected
d options. The option is used for adding a record behind Insert behind selected Add
the currently last one (i.e. the lowest priority record).
Ring patterns
In this tag assign the ring tones according to the calling party. Add more parameter
rows to the table using the context menu. The meanings of the columns are as follows:
Destination type – in this column choose one of the listed objects. When this
object is recognised, the extension rings according to the column. Pattern
Choose one of the CLIP, extension, extension type, user, group, virtual port and
virtual port type options.
Destination – in this column set an object of the type selected in the Type
column. If is selected, fill in (Calling Party Number). CLIP CLI
Scheme – this column is active only if the option has been selected in the CLIP
column. It defines whether the incoming CLI (Calling Party Number) Type
scheme is or . If this column fails to match the incoming scheme, Number URI
this row will not be used.
Pattern – in this column select a the ring pattern from the list of available PBX
patterns.
Again, it holds true that a row situated higher in the configuration has a higher priority.
To change the priority of the rows, use the two arrow buttons on the right. To add a
row with a certain priority easily use the
and Insert ahead selected Insert behind
options. The option is used for adding a record behind the currently last selected Add
one (i.e. the lowest priority record).
Softphone
The subtag is used for setting parameters of the StarPoint key phones. Softphone
These settings are not created automatically (except for the Default IN virtual ports),
but on all levels of the fall-down hierarchy using the
but Create Softphone extension
ton. To delete a setting, use the button. The Remove Softphone extension
tag has two subtags: and . The subtag Softphone Keypad Parameters Parameters
is used exclusively for setting the StarPoint key phone parameters. The tag Keypad
helps you set the type of the terminal connected. The key phones are detected
automatically on the extension level only. The other subtag settings relate to the
StarPoint key phones again.
Terminal – choose an item from a list of available terminals:
ANALOGUE – indicates any analogue terminal.