2N TELEKOMUNIKACE a.s., www.2n.cz
81/92
volume. If the volume is still very low, try to record the message using another device.
Having completed message editing, click
to load the message set into
Load to device
the
device connected. Click
to save the current set onto
2N
LiftIP
®
Save to directory
your PC disk. Select a message and click the Trash icon to delete the message.
Caution
The output volume value in the application does not affect the master
volume of the record to be saved into the audio unit. Thus, if the
recorded volume is too low, record the message once again and louder.
Tip
Use high-quality microphones and properly noise-insulated rooms with
good acoustic properties for recording to avoid noise and interference in
your records.
Recording Settings
Find the Recording settings to the left. Select one of the available input devices in
: integrated or external microphone or line input.
defines the
Select source
Mic level
microphone input drive level.
defines the input gain. The total memory
Mic gain
capacity for a message to be saved into
is 30 seconds. The time left for
2N LiftIP
®
message editing is displayed in the
parameter.
Time left
Note
If the microphone input is overdriven during recording, turn down the
mic input gain. If the record is too silent, turn up the mic input.
In case the application gain setting is not sufficient, use system
controllers or an external amplifier.
