2N Helios IP, Руководство по настройке

Страница: 130 / 177

2N TELEKOMUNIKACE a.s., www.2n.cz 130/177
1.
a.
b.
c.
d.
Default to – the intercom sends messages to the e-mail address specified for the
user when a valid user card is applied. When an invalid card is applied or no e-
mail address is assigned to the user, the message shall be sent the e-mail
address included here. If the receiver is included neither in the phone book nor in
this parameter, no e-mail shall be sent. You can set more e-mail addresses
separated with a comma if necessary.
Subject – set the e-mail subject to be sent.
Body – edit the text to be sent. Use the HTML formatting marks in the text. You
can insert special symbols substituting the username, date and time, intercom
identification or authentication ID, which will be replaced with the actual value
before sending. Refer to the table of substitute symbols below:
$User$ Called username
$DateTime$ Current date and time
$AuthId$ User authentication ID
$HeliosId$ Intercom identification
Attach snapshot – enable sending of an attachment including one camera
snapshot taken during ringing or calling.
Snapshot resolution – set the snapshot resolution for the image to be sent.