2N Helios IP, Руководство по настройке

Страница: 53 / 177

2N TELEKOMUNIKACE a.s., www.2n.cz 53/177
Code – enter a numeric code for the switch. The code must include 2 characters
at least but we recommend you to use four characters at least to make the code
accessible from the intercom numeric keypad. Codes 00 and 11 can't be entered
from numeric keypad. Code is confirmed with *. Code length up to 16 characters.
Accessibility – block the switch activation code entering from the intercom
numeric keypad or your phone.
Time profile – assign a time profile to the switch code to control its validity.
Activation by call – enable switch activation by an incoming or outgoing call, for
example. During an outgoing call the switch is activated after SIP message 180
Ringing is received. The called party confirms ringing by this message. The
switch is active during the whole call in the bistable mode, and activated by the
call beginning and deactivated after the predefined switch-on duration in the
monostable mode.
Activation by quick dial button – assign a quick dial button to the switch. The
switch is activated whenever the button is pressed.
Activation by time profile – activate the switch by a pre-defined time profile. The
switch will remain active as long as the assigned time profile is active.