2N Helios IP, Руководство по настройке

Страница: 52 / 177

2N TELEKOMUNIKACE a.s., www.2n.cz 52/177
– assign an electric output to the switch. Choose one of the Controlled output
available intercom outputs: relay, power output, extender output. If you select
, the switch will not control any electric output but can control external None
equipment via HTTP commands.
– if you use the module, set the output Output type 2N Helios IP
®
Security Relay
type to . In the mode, the output works in the inverse mode, i.e. Security Security
remains closed and controls the module using a 2N Helios IP
®
Security Relay
specific pulse sequence. If you use the inverse mode (i.e. the door is locked
when voltage is applied), set the
output type. inverse
Note
2N
®
– be sure to set the internal power supply and Helios IP Vario
switching relay on the configuration connector.
2N
®
– the security relay is connected to the DOOR + and Helios IP Force
- terminals.
The table above includes a list of universal codes that help you activate switches from
the phone or intercom keypad. Up to 10 universal codes can be defined for each
switch (depending on the particular intercom model).