2N BlueStar, Руководство пользователя

Страница: 76 / 177

Configuration Tool 3.4
76
VoIP Board

Board type and status;

Firmware version downloaded into the VoIP board;

Maximum number of licenced voice channels;

Status of voice channels.
GSM / UMTS Board

Board type and status;

Statuses of layers 2 and 3, statuses of the module communication layers;

GSM network - name of the network where the module is currently logged in;

Network ID - ID number of the network (MCC+MNC) where the module is
currently logged in;

GSM cell - identification number of the GSM cell the module is currently logged in
to. Displayed code numbers in the A,BBB,CCC,DDDDD format are received from
the wireless engine:
A = Status of wireless part:
0 – The wireless engine is currently not registered;
1 – The wireless engine is registered to the home network;
2 – The wireless engine is not registered, but is searching for a new provider;
3 – The wireless engine registration was denied by the network;
4 – The unknown reason;
5 – The wireless engine is registered to a roaming network;
BBB = LAC (Location Area Code) first byte in DEC format;
CCC = LAC second byte in DEC format;
DDDDD = cell identification code;
Note

Registration to a roaming network is restricted by default. For roaming
enable refer to Subs. 2.4 - Installation.

Upon the dealer‟s request, 2N can activate the restriction of use for
selected wireless networks only. Thus, the gateway will be unable to log in
successfully to the restricted wireless networks. This state is signalled by
the red status LEDs on the GSM / UMTS cards and the „netw-err‟ message
on the configuration tool diagnostics screen.

Number of used Outgoing / Incoming GSM groups;

Number of active SIM card positions;

Module ID - wireless engine international identification number (IMEI);

Rev ID – wireless engine module firmware revision number;