2N BlueStar, Руководство пользователя, Страница: 60 / 177

Installation 2.4
60
Warning

Do not cover the top, bottom and rear sides of the gateway to avoid
overheating and gateway error!

Protection against humidity and extreme temperatures: The appliance
may never be placed close to heat sources (radiators) or places exposed
to direct sunshine. Also places with high humidity (such as bathrooms and
cellars), places with significant temperature fluctuation (next to doors,
windows), dusty places (workshops) and places exposed to aggressive
gases (accumulator rooms, boiler rooms) as well as places with intensive
vibrations and places exposed to shocks (compressor rooms, heavy
industrial operations) should be avoided. The system should be installed
horizontally.
Main Installation

Place the gateway into an environment that complies with the gateway
working conditions.

Configure the gateway properly using the configuration software included.

The gateway mains supply must be backed-up and overvoltage-protected (a
line-interactive or on-line UPS is recommended).

Any of the available remote control tools (ISDN line, analogue line, Ethernet)
are advised for a more comfortable gateway administration.
Control Ways
The system can be supervised and controlled locally or remotely as follows:

Local control using a PC connected by a standard full crossed serial cable;

Remote control using an analogue or ISDN modem connected to COM2
located on the AUX board;
1U free space