2N BlueStar, Руководство пользователя, Страница: 88 / 177

Configuration Tool 3.4
88
o
All successful – all successfully connected calls will be saved.
o
All outgoing – all outgoing (including unconnected or rejected) calls will
be saved.
o
All incoming – all incoming calls will be saved.
o
All – all types of calls will be saved.

PIN
The PIN code that the gateway will use for SIM cards with PIN protection. All
the SIM cards inserted in the gateway must have the same PIN code if the
PIN protection is active. This parameter has no influence upon remote SIM
cards used by the 2N
®
SIM Star system.

Gateway ID
The gateway identification number to be added to every CDR line. With this
number you can more easily detect on which gateway the CDR were
generated (in case you are collecting CDR from more than one gateway).

General selection of SIM cards
Selection of the SIM card holder to be used by the gateway. This parameter
has no influence on the gateways connected to the 2N
®
SIM Star system.
o
According to GSM groups – the SIM card is selected according to the
settings of the
Outgoing GSM group to which the wireless module is
assigned.
o
SIM card in slot # - hardware selection of the SIM card holder position.
This setting overrides the
Outgoing GSM group setting!

Number for remote control (PRI 1, PRI 2)
The remote control number for a date call via the B-channel of the ISDN PRI 1
or PRI 2 interfaces (this feature is optional, for details refer to Subs. 2.1 – PRI
Board).

Automatic log-out of GSM modules
This function is used for automatic log-out of wireless modules from the
wireless network in a selected time interval. If the logged-in modules are
occupied by a call, the logged-out modules log in again automatically. If the
traffic drops, the modules log out again from the network at random intervals
.
o
Enable automatic log-out – enable/disable the feature.
o
Log-out hour – set the time interval for the wireless modules to start
logging-out randomly from the wireless network.
o
Log-in hour – se the time interval for the wireless modules to start
logging-in back to the wireless network.
o
Min. logged-in modules – set the minimum count of wireless modules
that remain logged-in.

Automatically move to summer/winter time
An automatic change of the internal clock according to the local DST (Daylight
Saving Time) conditions.

Configure gateway as (use protocol)
Use this parameter to switch the signalling protocol. The type of the used
signalling protocol depends on the available fixed interface card (VoIP-SIP, or
ISDN PRI).
o
ISDN-DSS1 – use this type of protocol when the connected gateway
contains a 1PRI or 2PRI board.