Installation manual 2N® IP Vario
92
/
113
•
•
•
•
•
•
•
•
Dynamic IP Address Setting
Connect
2N
®
IP Vario
to the power supply (or, disconnect and reconnect it if already
connected).Follow the instructions below to enable automatic getting of network parameters
from the DHCP server:
Wait for the first acoustic signal
Press following buttons sequentially:
2, 1, 1, 2, 2, 3 for 3-buttons models
5, 4, 4, 5, 5, 6 for 6-buttons modely
The acoustic signal
indicates mode switching.
Wait until the device is restarted automatically.
2N
®
IP Vario
gets the IP address upon restart only if the DHCP server is configured properly.
Mode Switching with 1-Button Models
Connect
2N
®
IP Vario
to the power supply (or, disconnect and reconnect it if already
connected).In case
your
2N
®
IP Vario
device is equipped with 1 button, you can switch the
modes using one button only.
Wait for the first sound signal
.
Press the quick dial button on the main unit 15 times.
•
Note
The 2, 1, 1, 2, 2, 3 sequence must be entered within 30 seconds after the first sound
signal for security reasons. The inter-digit delay may be 2 s at most.
Содержание 9137111CKU
