2N 9137111CKU, Руководство по установке

Страница: 48 / 113

Installation manual 2N® IP Vario
48 / 113
•
•
•
•
•
•
•
•
Outdoor Installation Rules
Always connect button backlighting – it is used for heating.
The joint between the roof module and the wall must be filled with a waterproof cement
to prevent water in-leak (see Figure 2.5).
Water must not leak in along or around the cables.
Name Tag Material and Printing
Each 2N
®
IP Vario package includes a sheet of transparent foil for laser printing. Cut the printed
foil into pieces and insert the labels in the name plates. Do not use paper to avoid water in-leak
and paper damage.
Red arrows are printed on the name plate. Make sure that the text and the arrow do not overlap.
We recommend you to use a template (MS Word) available in section
Downloads for printing.
Flush Mounting
Follow the installation instructions included in the flush mounting box delivery.
2.3 Electric Installation
Description of Printed Circuit Board Connectors
Terminal Block X2 Connection
Ethernet Connection
Electric Lock Connection
External Power Supply Connection
•
Warning
Make sure that all the holes are filled with a waterproof material – top, around the
cables and screws - and that a side sealing is ensured.

•
Caution
The warranty shall not apply to product failures and defects caused by improper
installation (contrary to these instructions). The manufacturer is neither liable for
damages caused by theft within an area that is accessible after the attached
electric lock is switched. The product is not designed as a burglar protection
device except when used in combination with a standard lock, which has the
security function.
