2N 02407-001, Руководство по установке

Страница: 60 / 88

Installation Manual 2N® IP Style
60 / 88
•
•
•
•
•
•
•
•
•
Wiegand Module
The Wiegand module ( Part No. 9155037 ) is one of the 2N
®
IP Verso system elements and is used
for connecting an external Wiegand device (RFID card reader, fingerprint / biometric data
scanner) and/or connecting the intercom
to an external security exchange. All the inputs and
outputs are galvanically isolated from the intercom with the insulation strength of 500 V DC. It is
necessary to feed +U IN on Wiegand OUT from the Control Panel.
Reader – connects an external Wiegand-supporting reader. The reader sends information
on the intercom card number.
Control Panel – used for connection to the security PBX / access system to which the
intercom sends the card number information.
The module contains two
2N
®
IP Style bus connectors.
These two connectors are fully interchangeable and can be used either as inputs from the
basic unit or outputs to other modules.
If this module is the last one on the bus, one of the connectors remains unconnected.
The module package includes a 80 mm long interconnecting cable.
Configure the module name in the Module name parameter in the Hardware / Extending
modules menu.
The LED IN input is addressed as follows: <module_name>.<input1> , e.g.
module2.input1.
The Tamper input is addressed as follows: <module_name>.<tamper> , e.g.
module2.tamper.
The LED OUT output (negated) is addressed as follows: <module_name>.<output1> , e.g.
module2.output1.