2N 02407-001, Руководство по установке

Страница: 51 / 88

Installation Manual 2N® IP Style
51 / 88
•
•
•
•
•
•
•
•
Module Power Supply
All the 2N
®
IP Style modules, except for the tamper switch, are powered from a bus. The
available bus power output depends on the power supply type. The basic unit can use a 4A
power supply to increase the power available to the modules connected.
Power supply Specification Available power output
External supply 12 V ±15 % / 4 A DC up to 48
PoE+ 802.3at up to 21.6 W
Combined External PoE+
Infopanel Module
The Infopanel module ( Part No. 9155030 ) is one of the 2N
®
IP Verso system elements and is
used for inserting and backlighting the printed information.
The module contains two 2N
®
IP Style bus connectors.
These two connectors are fully interchangeable and can be used either as inputs from the
basic unit or outputs to other modules.
If this module is the last one on the bus, one of the connectors remains unconnected.
The module package includes a 220 mm long interconnecting cable.
Name tag dimensions: 69.2 (W) x 86.7 (H) mm (dimensional tolerance: +0;
− 0.5 mm).
Refer to www.2n.com for the printing template.
125 kHz RFID Card Reader Module
The 125 kHz RFID card reader ( Part No. 9155032 ) is one of the 2N
®
IP Verso system elements
and is used for reading RFID card IDs in the 125 kHz band.
The module contains two 2N
®
IP Style bus connectors.
These two connectors are fully interchangeable and can be used either as inputs from the
basic unit or outputs to other modules.
•
Caution
Purchase a frame / mounting box for the extending modules to be connected
according to the type of installation. This does not apply to the I/O, Wiegand and
tamper switch extending modules.
