2Face Time Keeper, Руководство пользователя

Страница: 11 / 18

4 Using Instructions
4.1 First Use And Preparation
1) Remove your 2 Face / Face Evolution Device, DC
Charging Adaptor from the box.
2) Insert the DC plug of adaptor into DC hold of the
device.
3) Connect the Power plug into an electrical outlet
(AC100-240V 50Hz/60Hz 0.2A). When charging, the
Red-Green double color light turns red and it will turn
to Green when full charged.
Note:
a) Charge your 2 Face / Face Evolution Device for 12
hours before the first use. When charging, the
Red-Green double color light turns red and it will turn
to Green when full charged.
b) We recommend a full charge cycle of 12 hours if
the battery power is drained completely. A fully
charged 2 Face / Face Evolution should last for
approximately 30 minutes.
c) We recommend charge the device every three
months if you do not use your 2 Face / Face Evolution
Device.
4.2 Usage Instructions For EMS Facial Toning
Indications For Use
1) PERSONAL PREPARATION Start by cleaning your
face with an oil-free cleanser. Men should shave
before treatment, as hair can interfere with the
conductivity of the treat parts.
Note:
a) The facial area under a beard or mustache cannot
be treated. When you use the 2 Face / Face Evolution
Device, make sure you are positioned in front of a
mirror in a well-lit room.
b) Any make-up and/or oil-based products left on the
skin can block the penetration of microcurrent.
Treatment
1) Ensure that you have no allergic reaction to the 2
Face / Face Evolution gel primer before proceeding.
2) Apply the 2 Face / Face Evolution gel primer section
by section as you treat to prevent it from drying.
Note:
a) To ensure microcurrent penetration, use enough
primer to create a mask-like layer (do not rub in).
3) Turn unit ON by pressing the EMS button on the
front of your device. An audible beep will indicate the
unit is on.
4) Adjust the intensity level to your comfort by
progressively pressing the EMS button to increase or
decrease the microcurrent output. As you toggle
between the 4 intensity levels, an audible beep is
emitted and the number of illuminated blue lights will
change. At the 0 level no light will be illuminated, and
there are no microcurrent output. At 1 level, all one
blue lights will be illuminated. At the 2 level two blue
light will be illuminated. At the 3 level three blue light
will be illuminated.
5) The 2 Face / Face Evolution Device will not
contract the muscles and when used correctly, the
current is soft, very soothing and mild.
6) Remember to turn off the 2 Face / Face Evolution
Device after every treatment. The device will emit a
beep when device is turning off.
7) The 2 Face / Face Evolution Device will
automatically turn off after approximately 5 minutes of
use.
Note:
a) Treatment Frequency:
• Use for 5 minutes per day
• Use at least 5 days per week
• Allow 24 hours between treatment sessions
Skin Health Tip: Exfoliate 1-2 times a week for
enhanced results.
4.3 Usage Instructions For PHOTON
Indications For Use
There are 25 Photon lights in 4 different colors modes
with SUS304 treatment probe. SUS304 treatment
probe is intended to be placed directly on the skin to
get a nice feeling and provide topical heating with the
temperature 41
℃
±2
℃
1) Red RGB Light (620 - 730 nm Wavelength)
Red light is proven to stimulate the production of
collagen. Collagen is essential for repairing damaged
skin tissue and improving skin texture. This leads to
reduction of fine lines, wrinkles, scars, large pores
and hyperpigmentation. You will enjoy young, healthy
and vibrant complexion with continued use.
2) Green RGB Light (525 - 550 nm Wavelength)
Green light reduces hyperpigmentation, discoloration,
freckles, sun damage, and age spots. It lightens and
reduces existing pigmentation, improves overall skin
tone, and protects skin from premature discolorations
without the use of harmful skin lightening
3) Blue RGB Light (430 - 450 nm Wavelength)
Blue light reduces inflammation and drastically boosts
skin recovery while decreasing skin oiliness by
lowering excess sebum production.
4) White RGB Light (All the Red, Blue and Green
lights work together)
Compound the benefits of red light, blue light and
green light. Comprehensively balance and care your
skin, reveal you perfect skin condition.
Treatment
1) Turn the unit ON by pressing the PHOTON button.
The first light is Green Light, to show the Photon
function is turned on. It has low power testing
function, when the power is lower than 3.0Volts, the
green indicate light will be twinkling.
2) The Second light is RGB Light, which shows the
Photon therapy mode is working. Adjust the Light
mode to your aimed function by pressing the
PHOTON button repeatedly. Place the treatment
surface (massage head) on your skin, the RGB Light
Indicator will automatically activate.
Apply light pressure while slowing moving the device
in small circular motions, the treatment surface
temperature will slowly increase.
Press one time, the Red light works and the RGB
Light Indicator turns Red;
Press second time, the Green light works and the
RGB Light Indicator turns Green;
Press third time, the Blue light works and the RGB
Light Indicator turns Blue;
Press forth time, the White light works and the RGB
Light Indicator turns white, that means all the Red,
Green and Blue lights work simultaneously.
Note:
a) Only when the massage head touches the skin can
the device work. There is 1 minutes for the device to
detect the human body induction. The device will turn
off automatically if no human body were detected in 1
minutes.
b) The White light works and the Function indicator
turns white, that means all the Red, Green and Blue
lights work simultaneously.
3) Perform the treatment for 5~7 minutes on each
area.
4) It is recommended to apply a small amount of
Moisturizing cream on the treated skin areas after
each session and to massage it gently in circular
motions.
5 Maintenance
After each session, it is recommended to clean the
device.
1) Turn the device OFF by pressing the EMS and
PHOTON button.
2) Unplug the device from the electrical outlet.
3) This device is designed for household use and is
virtually maintenance free. To clean the head and
body of this device, use a cloth only. Do not use
strong chemical cleaners.
4) If the cord or device is damaged or does not
operate properly, contact the distributor.
Never allow the power supply cord to be excessively
pul RGB or twisted. Inspect the cord frequently for
damage. Stop use immediately if damage is visible, or
if device stops or operates intermittently. Do no wrap
the cord around the appliance.
5.1Cleaning
1) Make sure device is off and unplugged from the
A/C outlet.
2) Clean the outside of the unit with a damp cloth or
paper towel. Be careful not to allow any moisture to
penetrate the seams of the unit. Allow sufficient time
to dry by standing the unit in a vertical position
against a corner.
Note:
-DO NOT immerse the device unit in water or a
dishwasher.
-DO NOT open or dismantle the housing of the unit,
as there are no user serviceable parts inside.
-DO NOT drop or apply pressure to the outside of the
unit since this may damage or weaken the bulb and
other components.
-DO NOT use alcohol, benzine or other types of
solvents to clean the unit, as such substances will
weaken and/or permanently damage the components
and materials used in the manufacturing of the unit. If
necessary, use only mild dish washing soap with a
damp cloth.
5.2 Trouble Shooting
In the event that the device fails to perform as
intended, the following notes will help to identify
potential problems with the device and its setup.
5.3 Disposal of Electrical and Electronic
Equipment Waste (E-waste)
Disposal information for e-waste depends on the city
you are in, as all regulations are local, to learn about
recycling or disposal programs in your area search
“E-waste recycling or disposal” online.
You can also contact your city directly or look into your
local electronics store policy.
6 Service
The 2 Face / Face Evolution (Model: 2 Face / Face
Evolution) has no parts you can fix. Do not try to repair
it. If the 2 Face / Face Evolution requires service,
please contact Heat In A Click LLC. All returned units
Problem Solution
Device turns off
automatically
Maybe reach the set time
or low power
Device cannot not
turn on
Check and recharge
batteries. Make sure contact
points on device and
charging stand are in contact
and the device is properly
seated within the charging
stand.
Device shuts off in
mid-treatment or only
after few treatments
Check and recharge
batteries.
17 18