1. Rotate the shock level knob, set to level 1 .
2. Place two finger over both contact points of the training collar.
3. Press and hold the Stimulation Button on the remote for 1-2 seconds. At
this level, you should feel continuous stimulation.
4. Keep going up the levels until the sensation starts to feel uncomfortable.
3
5
4
6
7
User Manual
0.3.0.02.T30010-24-01
T30
E- collar
Dear Pet Parent!
Thank you for purchasing AbbiDot.
Here at Abbi, we are happy if you and your pet are happy. We know that
nurturing a lasting bond with a pet takes patience, commitment and just a
little bit of help. This is why we dedicate all of our time and creative
resources to making pet care accessories that are smart and simple.
Our products are not meant to replace the training process — they are
here to aid it. They should never be used as punishment, overused or
treated as an one-fit-all solution. They are the most effective at the very
start of the training process and when showing your pet the danger of
certain behaviors: like crossing the road or picking up food on the street.
We strongly recommend focusing on reward training and making positive
reinforcement the base of your training routine. Your pet’s safety and
well-being should always stay a priority throughout this experience.
We know that any training process is a two-way street. We learn just as
much from our pets as they do from us. Help us make our products better
by sharing your training success stories with us.
AbbiDot Team
Yours
TABLE OF CONTENTS
Overview .......................................................................................... 04
Product Setup .................................................................................. 05
How to Charge the Remote and Collar?........................................... 05
Get the Remote Ready ..................................................................... 06
How to Increase/Decrease Shock Level?.......................................... 08
How to Use the Light Test Tool? ...................................................... 08
How To Pair Remote With the Collar? ............................................. 09
How To Pair the Second Collar With the Remote ............................ 09
How To Find The Best Stimulation Level For Your Pet ..................... 10
Device Information........................................................................... 11
Troubleshooting Guide..................................................................... 12
Dog Training Guide........................................................................... 13
Teaching Basic Obedience................................................................ 14
The “Come” Command .................................................................... 15
The “Stay” Command....................................................................... 16
Eliminating Unwanted Behavior....................................................... 17
Jumping Up....................................................................................... 17
Digging.............................................................................................. 18
Chasing ............................................................................................. 19
Trash Raiding.................................................................................... 20
General Tips ..................................................................................... 20
Terms of Use and Limitation of Liability.......................................... 21
Frequently Asked Questions ............................................................ 22
Warranty and Repair Information.................................................... 24
OVERVIEW
Note:
PRODUCT SETUP
HOW TO CHARGE THE REMOTE AND COLLAR?
Before Using the Dog Training Collar, Follow These Setup Steps:
1. Charge the Remote and Collar.
2. Get the Remote ready and turn it on.
3. Get the Collar ready and turn it on.
4. Test all button functions before placing the collar on your pet.
5. Use the Light Test Tool.
Please use the Output: DC 5V 500-2000mA charger to charge the product.
Don’t use a charger that does not meet the above specifications to charge
the product.
Make sure to turn the collar off when it’s not in use to save battery.
Before starting the training, place the collar on yourself and test it to see
how it feels. We recommend starting with the lowest setting and then
moving on to higher settings up to your personal comfort level.
Stimulation intensity can be adjusted from level 1 to level 36. Make sure to
make these adjustments carefully based on your dog’s reaction.
Continuous stimulation will go on for no more than 10 seconds.
To reactivate stimulation, release and press the button again.
Tone: sends a tone (non-adjustable level) to the training collar.
Vibration: sends a vibration (non-adjustable level) to the
training collar.
Stimulation: sends static stimulation (adjustable in 1-36 levels)
to the training collar.
Switch between channels (Dog 1 and Dog 2).
Press and hold to turn on/off.
Press to turn on/off LED light on collar.
Rotate to increase/decrease Stimulation level.
Press down to lock/unlock all buttons.
1. To turn on the remote, press and hold the ON/OFF button.
2. The screen will light up and display current channel data and battery
level. If the screen doesn’t light up, charge the remote.
3. To turn off the remote, press and hold the ON/OFF button for over 2
seconds.
1. To turn on the collar, press the ON/OFF button.
2. The LED light on the collar will turn green. In standard mode, the Green
LED will flash every 4 seconds indicating that the collar is on and ready to
receive a signal from the remote.
3. To turn off the collar, press and hold the ON/OFF button for over 2
seconds.
1. Please use the supplied charging cable to charge the collar.
2. Once the collar is fully charged, its red LED indicator will turn green.
Once the remote is fully charged, its battery indicator will show up as full.
3. Once the collar is fully charged, place the rubber cap covering the
charging port back in its place.
1. Excessive charging will shorten battery life. Try to only charge the
remote and collar when they are low on battery.
2. When you’re not using the collar, turn the device off to save battery.
3. Use the following output: DC 5V 500-2000mA
Don’t use chargers that don’t meet necessary specifications to charge the
remote and collar.
8
9
10
11
12
HOW TO USE THE TEST LIGHT TOOL?
HOW TO INCREASE/DECREASE STIMULATION LEVEL?
We strongly suggest TESTING the collar before putting it on your pet.
GET THE REMOTE READY
Note:
Note:
Note:
Do not press and hold the Vibration/Stimulation Button for extended periods
of time. This may cause physical or psychological pain to your pet.
Important!
How To Turn ON/OFF the Remote?
How To Turn On the Collar?
1. Make sure the collar is off your dog.
2. Turn on the collar.
3. Hold the test light’s contacts against the contact points of the collar.
4. Press the Stimulation Button — the test light tool will light up. Its
brightness will increase or decrease depending on the level of stimulation
you are using.
1. Rotate right to increase Stimulation level.
2. Rotate left to decrease Stimulation level.
3. Press down to lock/unlock all buttons.
HOW LED LIGHT WORKS?
When you can't find your dog in the
dark, you can find it by lighting the LED
light.
Do not shave your pet’s neck as this may increase
the risk of skin irritation. Your dog shouldn’t wear
the collar for more than 12 hours per day.
Caution:
HOW TO FIND THE BEST STIMULATION LEVEL FOR YOUR PET?
Signs you need to charge the device:
Follow the steps below:
Important: always start with the vibration mode first and use the static
Stimulation mode as the last resort.
Depending on the model of your training collar, you may be able to access
anywhere from one to 36 different stimulation levels. This can help you find
the level that is best for your dog.
Once you’ve placed the collar on your pet, it’s time to find the most suitable
stimulation level.
At this stage of the process, you will need to watch your pet carefully for
the slightest changes in behavior like looking around in curiosity, scratching
at the collar or flicking ears. All these behaviors are indicators that you have
found a suitable stimulation level. This is also known as Recognition Level.
1. The LED indicator on the collar is red and flashing rapidly.
2. The battery indicator on the remote’s screen is flashing.
3. The LED light on either the collar or remote doesn’t turn on.
4. The LED light on either the collar or remote blinks but doesn’t turn on
when you press any of the mode buttons.
Make sure the Collar is turned on.
Check if the battery level is low on either the Collar or
the Remote.
The range of the remote may be affected by a number
of factors like terrain, weather, vegetation, transmis-
sion from other radio devices and so on.
Try testing the Collar using the test light tool (see
above).
Try increasing the stimulation level (please refer to the
How To Find The Best Stimulation Level For Your Pet
section).
Make sure the Collar’s contact points are in good
contact with your pet’s skin. Refer to the Collar Fitting
section for more information.
Make sure the Collar is charged.
When charging the Collar for the first time, charge it
for at least 4 hours. Subsequent charges only take 2-3
hours.
Make sure the Collar is turned on.
Check if both the Collar and the remote are sufficiently
charged.
Try pairing the Remote and Collar again (refer to the
How to Pair the Remote with the Collar section).
1. Start at the lowest stimulation level: press and hold the Vibration or
Stimulation Button continuously (further referred to as the [S] button).
2. If your pet shows no reaction, repeat the first step several times before
moving up to a higher stimulation level.
3. Your pet should not bark or panic when receiving stimulation. If this
happens, the stimulation level is too high and you need to go back to the
previous level and repeat the process.
4. Move up through the available stimulation levels until your pet responds.
5. If your pet continues to show no response at the highest stimulation level,
check if the collar is fitted properly. If your pet has long or thick fur, try using
the longer set of contact points. Then go back to step 1 and repeat the
process. If there is no change, you might need to trim your dog’s hair around
the contact points.
1. On the remote, use the channel switch to select Dog 1.
2. With the remote turned on and the collar turned off, press and hold
the ON/OFF button on the collar for 4-5 seconds.
3. The LED on the collar will flash for about 10 seconds to indicate that
it’s ready for pairing.
4. Press and hold Tone Button and Vibration Button at the same time for
2-3 seconds. The green LED on the training collar will blink 5 times to
indicate successful pairing.
On the remote, use the channel switch to select Dog 2. Next, follow the
above steps (2-4) to complete the pairing process.
For the best results, it’s important to select suitable contact points based
on the thickness of your dog’s coat.
You can use the contact points separately or together with the spring sheet.
When placing the collar on your dog, make sure it fits properly and the
contact points are pressed firmly against the dog’s skin. If the collar is
fitted too loosely, it may move during the training process and the
contact points may hurt the dog’s skin.
The collar should also not be fitted too tightly: you should be able to
place a finger between the dog’s neck and the training collar. If placed
too tightly, the collar may cause breathing difficulties for your dog.
HOW TO PAIR REMOTE WITH THE COLLAR?
DOG TRAINING
DEVICE INFORMATION
HOW TO PAIR THE SECOND COLLAR WITH THE REMOTE?
How to Select Contact Points and Contact Spring Sheet?
COLLAR FITTING
TROUBLESHOOTING GUIDE
My pet doesn’t
react to
stimulation
The collar
won’t turn on
The collar isn’t
responding to
the remote
A. Stimulation Level Knob & Lock
B. Switch Dog 1 or Dog 2 Mode
C. On / Off Button
D. LED Indicatior
E. Light Up Button
F. Tone Button
G. Vibration Button
H. Stimulation Button
Tone Indication
Vibration Indication
Stimulation Indication
Light Indication
Dog 1 or Dog 2 Mode
Shock Level Display
Lock
Training Indication
Battery Indicator
I. LED Light
J. On/Off Button
K. Contact Points (x2)
L. Charging Port (with cover)
Remote
Collar
A
B
H
D
E
F
G
L
I
J
K
C
Specification
*Remote Battery Life: 10 Days (Every 1 Min/Time, 4 H/Day)
*Collar Battery Life: 16 Days (Max. Level, Shock Every 1 Min/Time, 4 H/Day)
Lock/Unlock
All Buttons
Level
Down
Level
Up
T30 Dog Training Collar
AB-T30
3 (Tone/Vibration/Stimulation)
36 Levels
Detachable
Included
Up to 900m (3000 feet) in Open Space
Yes
Yes
Yes
2
Rechargeable Li-ion Battery
Remote: 10 days / Collar: 16 days
2 Hours
15.2 – 68.7 cm (6”– 27”)
7 x 3.6 x 2.4 cm (2.75” x 1.4” x 0.94”)
13.2 x 4.4 x 2 cm (5.2” x 1.7” x 0.78”)
Collar 77g (with strap) / Remote 62g
Not Waterproof (Keep Away From Water)
IEC 60529 IPX7, Waterproof
From 0-40
℃
(From 32-104
℉
)
20dBm
Product Name:
Model:
Training Modes:
Static Stimulation:
Contact Points:
Long Contact Points:
Wireless Range:
Momentary/Continuous Correction:
Stimulation Safety Lock:
Night-vision Light:
Multi-dog Compatibility:
Battery:
Battery Life:
Charging Time:
Collar Strap Fits Neck Sizes:
Collar Size:
Remote Size:
Weight:
Remote Waterproof Rating:
Collar Waterproof Rating:
Operating Temperature:
Wireless Power:
