background image

3.3 Main Device

3.3.1 Buttons

  

              

Figure 3-1. Keyboard of Main Device

1) EMS button

When you choose EMS Mode:

--Turn unit ON by pressing the EMS button on the 

front of your device. 

--Adjust the intensity level to your comfort by 

progressively pressing the EMS button to increase or 

decrease the microcurrent output. As you toggle 

between the 3 intensity levels, the number of 

illuminated blue lights will change. At the 0 level no 

light will be illuminated, and there are no microcurrent 

output. At 1 level, all one blue lights will be 

illuminated. At the 2 level two blue light will be 

illuminated. At the 3 level three blue light will be 

illuminated.

--Turn off the 2Face/Face Evolution Device by 

pressing the EMS button after every treatment. The 

device will emit a beep when device is turning off. 

The 2 Face / Face Evolution Device will automatically 

turn off after approximately 5 minutes of use.

2) PHOTON button

It provides continuous heat therapy through the use of 

PHOTON function. SuS304 treatment probe is 

intended to be placed directly on the skin to provide 

topical heating. (41

±2

℃)

When you choose PHOTON Mode:

--Turn the unit ON by pressing the PHOTON button. 

The first light is Green Light, to show the Photon 

function is turned on. It has low power testing function, 

when the power is lower than 3.0Volts, the green 

indicate light will be twinkling.

--The Second light is RGB Light, which shows the 

Photon therapy mode is working. Adjust the Light 

mode to your aimed function by pressing the 

PHOTON button repeatedly. Place the treatment 

surface (massage head) on your skin, the RGB Light 

Indicator will automatically activate.

Apply light pressure while slowing moving the device 

in small circular motions, the treatment surface 

temperature will slowly increase.

Perform the treatment for 5-7 minutes on each area.

Press one time, the Red light works and the RGB 

Light Indicator turns Red;

Press second time, the Green light works and the 

RGB Light Indicator turns Green;

Press third time, the Blue light works and the RGB 

Light Indicator turns Blue;

Press forth time, the White light works and the RGB 

Light Indicator turns white

 It means all the Red, 

Green and Blue lights work simultaneously.

-- The Third light is Red-Green double color light, 

when charging, the light turns red and it will turn to 

Green when full charged.

--Turn the unit OFF by pressing the PHOTON button. 

There is 1 minutes for the device to detect the human 

body induction. The device will turn off automatically if 

no human body were detected in 1 minutes.

3.3.2 Indicator

1) EMS Mode intensity Indicator 

As you toggle between the 4 intensity levels, an 

audible beep is emitted and the number of illuminated 

blue lights will change. At maximum level, all 3 blue 

lights will be illuminated. At the minimum level no blue 

light will be illuminated.

2) PHOTON Mode Working Indicator

Turn the unit ON by pressing the PHOTON button, the 

Working indicator (green light) will light up. It has low 

power testing function, when the power is lower than 

3.0Volts, the green indicate light will be twinkling.

3) Photon Mode Indicator lights

The Second light is RGB Light, which shows the 

Photon therapy mode is working. Adjust the Light 

mode to your aimed function by pressing the 

PHOTON button repeatedly. Place the treatment 

surface (massage head) on your skin, the RGB Light 

Indicator will automatically activate.

4) Charging Indicator.

The Charging Indicator light is Red-Green double 

color light, when charging, the light turns red and it will 

turn to Green when full charged.

9

10

Содержание Time Keeper



















Отзывы: