25-Seven PDM Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 79

background image

PDM Operator's Manual Version 2.4a • September 2019

PDM

Warnings

Important Safety Information

ELECTRICAL WARNING

If the equipment is used in a manner not specified by the manufacturer, the protection

provided by the equipment may be impaired. The installation and servicing instructions

in this manual are for use by qualified personnel only. To avoid Electric Shock, do not

perform any servicing other than that contained in the operating instructions unless you

are qualified to do so. Refer all servicing to trained service personnel. When using this

equipment, the following safety precautions should always be followed to reduce the risk

of fire, electric shock, and injury to people.

Read and understand all instructions.

Follow all warnings and instructions marked on the equipment.

Installation must be performed in accordance with all national wiring rules.

Caution: DOUBLE POLE/NEUTRAL FUSING

The PDM power supply incorporates an internal fuse. Hazardous voltages may still be

present on some of the primary parts even when the fuse has blown. If fuse replacement is

required, replace fuse only with same type and value for continued protection against fire.
While the power supply includes an external power switch, this product’s power cord is the

primary disconnect device. To prevent risk of electric shock, disconnect power cord before

servicing. The outlet to which this equipment is connected must be installed near the

equipment, and must always be readily accessible. The unit should not be positioned such

that access to the power cord is impaired. If the unit is incorporated into a rack, an easily

accessible safety disconnect device should be included in the rack design.
This equipment has an autoranging line voltage input. Ensure that the supply voltage is

within the specified range.
This equipment is designed to be operated from a power source that includes a third

“grounding” connection in addition to the power leads. Do not defeat this safety feature.

In addition to creating a potentially hazardous situation, defeating this safety ground will

prevent the internal line noise filter from functioning.

MOISTURE WARNING:

This equipment is intended for INDOOR USE ONLY and can be hazardous if immersed in

water. To reduce the risk of electrical shock, do not expose this product to rain or moisture.

Keep moisture away from the ventilation openings in the sides and rear of the unit. To

avoid the possibility of electrical shock, do not use this equipment when you are wet. If

you accidentally drop the equipment into water, do not retrieve it until you have first

unplugged all cords. Do not reconnect this equipment until it has dried thoroughly. Do not

shower or bathe with PDM.

«
1
2
3
4
5
...
»

Содержание PDM
















































































Отзывы:

Нет отзывов

Похожие инструкции для PDM

Бренд: Taurus Страницы: 28

Бренд: Kärcher Страницы: 54

Бренд: ABB Страницы: 85

Бренд: 4iiii Страницы: 36

Бренд: 4iiii Страницы: 34

Бренд: 4EVAC Страницы: 27

Бренд: Campbell Страницы: 2

Бренд: EASTERN INSTRUMENTS Страницы: 93

Бренд: Pari Страницы: 2

Бренд: Olympus Страницы: 56

HQ Power VDL25BM

Бренд: Velleman Страницы: 3

Бренд: iGuzzini Страницы: 36

AQUIS ULTRAFLOW

Бренд: Waterous Страницы: 56

Бренд: Zimmer Страницы: 54

Бренд: Zimmer Страницы: 4

Бренд: Zimmer Biomet Страницы: 23

Бренд: Zimmer Страницы: 16

Бренд: Zimmer Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды