25-Seven PDM Скачать руководство пользователя страница 25

Страница: 25 / 79

PDM

PDM Operator's Manual Version 2.4a • September 2019

Detailed Operating Instructions

When PDM is first powered up, transport buttons will light, and the unit will be in Bypass

mode. After about 10 seconds, the LCD displays this initialization screen for a few moments:

The

BYPASS

button is used for emergencies or when you want to take PDM out of the

signal chain

. It connects PDM’s analog and digital inputs to its outputs, with no proc-

essing or delay. It also clears PDM’s delay memory.

PDM automatically goes into electrical bypass, connecting its XLR inputs to its match-
ing outputs, when power is removed. Analog inputs are passed to their respective
analog output; AES/EBU input is passed directly to the AES/EBU output. This is totally
passive and no level adjustment or analog/digital conversion takes place.

Input Level Meter

PDM’s four color-coded LEDs indicate audio input level at the processor. They’re con-
nected after the analog-to-digital converter on XLR-equipped PDMs, so they can
accurately monitor any input regardless of the

Input

Sensitivity

setting.

•

If all four LEDs are dark, the input signal is below
-36 dBFS. This usually represents normal studio
background noise, with no talking or music.

•

As the peak input signal increases between
-36 dBFS and Full Scale, successive LEDs light up.

All four LEDs will light yellow if PDM is expecting a Livewire input but not seeing a valid
signal. This is usually a configuration problem. All four LEDs will also light yellow in the
unlikely event of internal error, even on XLR (analog and AES/EBU) systems.

PDM’s input meter shows instantaneous peaks as a diagnostic aid. It doesn’t display
RMS voltage or time-integrated level, and isn’t a replacement for the sophisticated
loudness meters found in a modern broadcast facility.

Detailed Operating Instructions

When PDM is first powered up, transport buttons will light, and the unit will be in By-
pass mode. After about 10 seconds, the LCD displays this initialization screen for a few
moments:

Welcome to

  25 Seven Systems
        PDM
   Please wait...

Once the hardware is successfully initialized, the screen will update; the level meters
will show activity if there is a valid audio input. PDM stays in Bypass mode

, and a

screen like this appears:

Occasionally, you may need to do software updates or other system-level maintenance (page 56). Put the unit

in Bypass mode, or remove it from the signal chain, before beginning these operations.

Once the hardware is successfully initialized, the screen will update; the level meters will

show activity if there is a valid audio input. PDM stays in Bypass mode

, and a screen like

this appears:

This says the current time is 10:32 AM. PDM can display time in 12 or 24 hour modes; see

page 23.
Press ◊ to enter the configuration menus.
After you turn off Bypass mode, the “ready” screen appears. This screen also appears after

you exit a delay.

PDM is in Bypass

10:32:00a

Menu√

This says the current time is 10:32 AM. PDM can display time in 12 or 24

hour modes.

Press

◊

to enter the configuration menus.

After you turn off Bypass mode, the “ready” screen appears. This screen also appears
after you exit a delay.

PDM is Ready
10:32:00a

Delay 0.0 Menu√

This says PDM is processing audio, and delaying it by whatever amount is

displayed on the bottom line of this screen.
• When you first enter

Ready

mode, PDM has no delay. This makes the

audio transition seamless.

• If you press

BUILD

, PDM starts to add delay and this number counts up.

If you press the

BUILD

button while the main screen is showing, PDM will start building

a delay.

General menu procedures

A few elements are common to many of PDM’s screens:

Menu√

means press

◊

to see a deeper menu. See

PDM’s Menus

, below.

OK√

means press

◊

to apply a parameter change, and return to the next higher menu.

But it won’t be saved permanently within PDM. See

Confirming Changes,

below.

CNCL#

means press

to return to the next higher menu without making any addi-

tional changes. If you’re on the Master menu, pressing

exits the menu system and

takes you to either the Main operating screen or the Confirmation screen (next section).

“‘ Chg value

means use

to change the value highlighted on this screen

{} Chg field

appears when a screen has more than one value that can be changed.

Use

‰

to select which value is changed by the

buttons. The active field

will be flashing on PDM’s screen.

More“

and

More‘

mean use

to see more menu options in this category

Confirming Changes

If you’ve made any parameter changes while in the menu system, you’ll see a Confirma-
tion screen like this before you return to the Master menu

   Configuration
    has Changed
       Save?    YES√
                NO

Press

◊

to permanently save these changes

Press

to erase these changes and restore PDM’s former settings

You may also see a brief

Waiting

for

audio

stream

message while PDM initializes its audio hardware.

Depending on which menu you’re in, you may need to press

a few times to see the Confirmation screen.

This says PDM is processing audio, and delaying it by whatever amount is displayed on the
bottom line of this screen.

When you first enter Ready mode, PDM has no delay. This makes the audio transition

seamless.

If you press build, PDM starts to add delay and this number counts up.

If you press the

BUILD

button while the main screen is showing, PDM will start building a delay.

11 You may also see a brief

Waiting

for

audio

stream

message while PDM initializes its audio hardware.

Содержание PDM
















































































Результаты поиска

Содержание PDM

Отзывы:

Похожие инструкции для PDM

Бренды по названию

Популярные бренды

25-Seven PDM, Руководство оператора

Результаты поиска

Содержание PDM

Отзывы:

Похожие инструкции для PDM

Бренды по названию

Популярные бренды