23
24
Technical data
Declaration of conformity
Problem
Cause
Solution
The paper shredder
does not start when
feeding in paper.
The paper is too thin, too
soft or too creased to reliably
activate the detection sensor.
1. Set the slide switch to
REV
position and pull the paper
out of the feed slot.
2. Fold the paper and feed it
again.
The paper shredder
does not start.
The safety switch is activated. Make sure the cutting unit
is positioned correctly on
the paper/credit card waste
bin until a click sound is
heard.
Technical data
Model:
DR-S4
Input voltage:
220–240 V~; 50 Hz
Power consumption:
300 W; 1.3 A
Protection class:
II
Safety class:
P-4 (according to DIN 66399)
Weight:
approx. 5 kg
Dimensions (W × D × H):
approx. 353 × 210 × 423 mm
Working width:
220 mm (A4)
Cutting method:
cross cut
Cutting speed:
approx. 2 m/min. for one 80 g/m² sheet
approx. 1.5 m/min. for ten 80 g/m² sheets
approx.1 m/min. for one credit card
approx. 3.5 m/min. for one CD
Bin volume:
20 litres (paper/credit card)
0.5 litres (CD)
Max. cutting capacity per cycle:
10 sheets (80 g/m²), 1 credit card, 1 CD
Strip dimensions:
5 × 16 mm
Continuous operation time:
3 min.
Idle time:
60 min.
Noise level:
approx. 70 dB
Operation temperature:
10–25 °C
Automatic start/stop function:
yes
Technical changes reserved.
Declaration of conformity
You can request a copy of the EU declaration of conformity from the
address stated on the warranty card.
Disposal
Disposing of the packaging
Sort the packaging before you dispose of it. Dispose of paperboard and
cardboard with the recycled paper service and wrappings with the
appropriate collection service.
Disposing of the old appliances
(Applicable in the European Union and other European countries with separate
collection systems of recyclable materials.)
Old appliances may not be disposed of in the household waste!
Should the paper shredder no longer be capable of being used at some
point in time,
dispose of it in accordance with the regulations in force
in your city or county.
This ensures that old appliances are recycled in
a professional manner and also rules out negative consequences for the
environment. For this reason, electrical equipment is marked with the
symbol shown here.
