Record the Main Mix:
To record the Main mix, you first have to arm it on the MIX screen. Then you can use the
transport buttons to stop and end recording.
1.
Push MIXER. If you don’t see the Rec button in the
control options at the bottom of the screen, push MIXER
again.
2.
Touch Rec in the control options at the bottom of the
screen.
3.
Touch the Main meter on the right to arm the Main mix
for recording. You can record the Main mix and
individual tracks at the same time.
4.
Use your external gear to send a signal to the inputs. You can also configure a
WAV file to playback for one or more tracks. These WAV files will not be recorded
in the Main Mix.
5.
Push the REC and PLAY transport buttons together to start recording.
6.
Push the STOP transport button when you want to end recording.
The Main mix recording is saved in a WAV file with the prefix 13-Main in the folder for the
project, but it is not listed in EDIT mode with the track WAV files. You can add the Main
mix recording to a track to play it.
Play a WAV file for a Track:
You can play WAV files that you recorded on bluebox and files you have copied onto the
microSD card. To do this, you need to assign the file to the track, set the status of the WAV
file to ACTIVE, and make sure the track is not armed for recording. When you record a file
on bluebox, it is mapped to the track used to record it. You can change this in EDIT mode.
1.
Push EDIT to see the list of files mapped to each track and the ACTIVE status of
the WAV files.
2.
If the file you want to play is listed but does not have the word ACTIVE in the
right column, you will need to make it ACTIVE. Turn a knob or touch the screen
to select the WAV file you want to play. Push A to set the selected file as ACTIVE
for playback for that track.
3.
If you want to add a file to a track, select the track and then touch File and Add.
Select the file you want to add and then touch Load. You can navigate to other
folders to find the file if needed. Touch the ^ to go back to a previous folder in
the hierarchy, or touch Load to drill into a folder in the list.
4.
Push MIXER and check the status of the tracks you want to play. If a track has a
red frame, you have to disarm the recording status. Touch Rec at the bottom of
the screen, and then touch the tracks you want to disarm.
5.
Push the PLAY transport button to start playback of the ACTIVE WAV files for the
tracks that are not armed for recording.
MIXER Mode - Main
Armed to Record
Copyright 1010music LLC 2020
Page 43 of 50
Jan 7, 2021
Bluebox User Manual v 1.0.5
Содержание BlueBox
Страница 1: ...Bluebox V1 0 5 User Manual ...
