P. 28
nanobox | tangerine User Manual
Dec 11, 2023
RECORDING A SEQUENCE
You can record a sequence that is played directly on the pads, the Keys screen, the Grid Screen,
or over MIDI inputs.
1.
Push the Home button until the Sequencer Home screen appears.
2.
Touch an empty sequence to select it. This is the sequence that you will record into.
3.
Open the Transports pop-up by touching the clock or holding down the Right Arrow
button.
Transports Pop-Up
4.
Touch the REC button to queue recording, then touch PLAY to begin recording. A
red circle appears to indicate you are recording.
5.
Navigate to the Pads Home screen, Keys screen or Grid screen.
6.
Play the sequence. The sequence will play in a loop when it reaches the end of the
sequence length, which is 1 measure by default. You can add additional notes or
drum hits by playing along with the loop.
7.
You can also play pads using an external MIDI controller and they will be recorded.
8.
When done, open the Transports pop-up and touch REC to stop recording while
continuing to play the sequence, or touch STOP to end recording and playback.
Sequencer Home
