1010 Music nanobox tangerine Скачать руководство пользователя страница 105 | Manualshive

Страница: 105 / 137

background image

P. 105

nanobox | tangerine User Manual

Dec 11, 2023

IMPACT OF MODULATION ON PARAMETER VALUES

When you apply modulation to a parameter, each modulation source contributes to the
modulation of the parameter’s current value. The degree of that modulation depends on:

■ the value range of the parameter being modulated,

■ the values that the modulation Source produces, and

■ the modulation Amount setting for the Source.

Each pad parameter has a value range suitable for its function. Some For example:

■ The Filter parameter’s value range is -100% to +100%, with 0.0% at the center of its range.

■ The Res parameter’s value range is 0.0% to 100%, with 50.0% at the center of its range.

Modulation source value ranges also differ significantly. Some modulation sources have
uni-polar “throws” and cover a range of positive values, while others are bipolar and cover a
range of negative and positive values around a mid-point. For example

■ MIDI Continuous Controllers and MIDI Note velocity all provide values in the range of 0-

127.

■ MIDI Note numbers have a range of 0-127, but when using KEY as a modulation source,

64 (C4) corresponds to a center point (0), notes below 64 (C4) correspond to negative
values, and notes above 64 correspond to positive values.

■ MIDI Pitch-wheel has a center position that corresponds to an unshifted pitch and lower

and higher positions that correspond to negative and positive pitch shifts.

■ The tangerine’s LFO can produce uni-polar or bipolar values depending on the LFO

waveform.

The tangerine maps the value range of these modulation sources to a range of the
parameter’s values as follows:

■ the middle of the modulation source’s range maps to the current parameter value,

■ the modulation source’s lowest value maps to the current parameter value minus the

modulation Amount, and

■ the modulation source’s highest value maps to the current parameter value plus the

modulation Amount.

For example, if the Filter parameter is set to 20%, and you use PTCH as the modulation
source, and set the Modulation Amount to 15%, then the lowest Pitch Wheel position would
map to 5% (20% - 15%), and the highest Pitch Wheel position would map to 35% (20% + 15%).

«
...
103
104
105
106
107
...
»

Содержание nanobox tangerine










































































































































Отзывы:

Нет отзывов

Похожие инструкции для nanobox tangerine

Venturi 19-BAS-001

Бренд: Biotector Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды