©
Paulson Manufacturing Corporation 2020 Errors and technical changes reserved
Page 1 of 5
User Information & User Manual
PAULSON Heat Reflective Quick View Shield Series
QVGHC-6, QVGHCFM-6, QVGHCFM-4
ANSI Z87.1+; EN 166:2001; EN 171:2002
1. Introduction
This document provides all necessary information to use and maintain
PAULSON Heat Reflective Quick
View Shield Quick View Series
products. To be properly protected you must carefully study this manual
before use! Failure to follow these instructions can result in a permanent impairment of sight or other
serious personal injury. For the Declaration of Conformity (DoC) enter the article number as shown above
to the search field at
https://www.paulson-international.com
.
2. General Warnings
Use by skilled persons as per your Hazard and Risk Analysis only (see Chapter 16).
Only use as a kit.
Only use original replacement parts.
Make sure that your workplace is sufficiently illuminated.
Free head movement and personal view may be affected.
Insufficient packing may decrease the level of protection. Thus, follow the instructions as per
Chapter 9.
The following warnings are standard warnings as per EN 166:
Material which may come in contact with the wearer's skin could cause allergic reactions to
susceptible individuals. (REMARK: PAULSON carefully selects the materials and is not aware of
any allergic reaction so far.)
The
PAULSON Heat Reflective Quick View Shield
protects against high speed particles. The
protector shall only be used against high speed particles at room temperature.
When worn over standard ophthalmic spectacles, they may transmit impacts, thus creating a
hazard to the wearer.
3. Field of Application
The
PAULSON Heat Reflective Quick View Shield
, together with additional PPE appropriate for the afore
determined level of protection, protects the qualified user minimizing the effects of radiant heat sources to
eyes and partly the face, when correctly selected, used and combined with further appropriate PPE. They
are not intended to be used for protection against laser radiation.
Despite of the fact that the short
PAULSON Heat Reflective Quick View Shields
can be worn as stand-
alone face shields, they are mainly designed to be combined with other, e.g. larger clear or tinted face
shields (→ ‘Base Shield’ see Chapter 7).
WARNING: The
PAULSON Heat Reflective Quick View Shield
is designed to protect against the radiant
heat source, e.g. as emitted by molten metal or hot solids at an average temperature of up to 1150°C
Product Code
Part Number
QVGHC-6
2040124
QVGHCFM-6
2040125
QVGHCFM-4
2030100
CB2-HD
9004860
CB2-HD-CT (Euro Clip)
9004870
CB6-HD
9005212
