background image

 Owner’s Manual  Model Number 060-0198-6  Trailer Sprayer

Your New Sprayer

Congratulations on your purchase of a new

 

Certified 

TM

  

Trailer Sprayer. Your sprayer has been engineered and  

built to give you the most dependable and best performing  

product possible. Proper operation and maintenance  

will ensure long satisfactory service. Please study

the manual carefully to become familiar with the  

operation and maintenance instructions.

Keep your manual in a safe, convenient place for future  

reference. Always mention the model and part number in  

any correspondence when ordering parts.

If you experience any problem you can not easily resolve,  

please feel free to contact our knowledgeable and helpful  

customer service department toll-free at 1 (844) 428-7277.

Manual Contents

Safety Instructions    

 

 2 

 

   

          

Parts List 

 

 

 

    

3

Assembly 

 

 

 

   

  4 

 

   

 

          

Operation and Maintenance    

 8 

 

   

 

   

Sprayer Calibration    

 

 9

Warranty/Parts and Support   

12 

 

   

 

            

Caution: Carefully read all rules and  
instructions for safe operation. Retain  
this manual for reference.

Tread pattern on tire may vary

Summary of Contents for 060-0198-6













Reviews: