EN
77-2875-R7.2 (6/2015)
1 / 8
SERVICE MANUAL
BINKS SV100 HVLP
GRAVITY FEED SPRAY GUN
7042-6931-4
The following instructions provide the necessary information
for the proper maintenance of the Binks SV100 gravity
feed spray gun. Please read and understand all the
information in this document in order to get the maximum
performance from your new SV100 gravity spray gun.
The SV100 spray gun is the result of quality engineering
and development activity. The result is an ergonomic
product with reduced triggering effort and fine atomization.
The HVLP air cap has been specifically designed to
comply with local regulatory air quality restrictions.
The specification table details the operating parameters
of the gun to achieve those compliant conditions.
In addition, the relatively low air flow rate of the SV100
spray gun will help in containing overspray.
The SV100 spray gun should be operated under the safety
directions outlined in this literature. Your safety and the
safety of others depend on your thorough understanding
of the material contained on the Part Sheet.
If you have any questions or do not understand the
content in this literature, call your nearest service
representative.
SPECIFICATIONS
Max. Air Pressure:
175psi/12bar
For HVLP Compliance: 26 psi inlet pressure delivers
(with SV100-693K cap) 10 psi air cap pressures at
12 cfm air volume
Gun Body:
Cast Aluminum
Fluid Path:
Aluminum
Fluid Nozzle:
Stainless Steel
Fluid Needle:
Stainless Steel
Fluid Inlet Size:
3/8"-19 BSP(F)
Air Inlet Size;
1/4" NPS(M)
Gun Weight:
1.02 lbs. (461 g)
