background image

Part #AS76      Copyright © 2014 by Hydro-Force     Rev. 1/14

LIMITED WARRANTY

Your Flexi Pro Sprayer is designed to give you years of reliable service. If 

a problem should arise, use the troubleshooting section in the operation 

manual to diagnose and correct the problem if possible. 

If you are unable to determine the cause or solution to the problem, 

contact your distributor or Hydro-Force for assistance.

Hydro-Force warrants the Flexi Pro Sprayer to be free of defects in material 

and workmanship. This warranty shall extend for one year from the date of 

purchase. 

During the warranty period, Hydro-Force will, at its option, repair or 

replace components which prove to be defective. This warranty does not 

provide for replacement of complete units due to defective components. 

Any costs for transportation or related service labor are not covered in this 

warranty. Replacement parts are warranted only for the remainder of the 

original warranty period.

This warranty shall not apply to defects resulting from improper operation, 

lack of maintenance, unauthorized modification, chemical incompatibility, 

misuse, abuse, or exposure to freezing temperature conditions. It does not 

cover normal wear items such as o-rings, valve seals, pump seals, hoses, 

jets, cords, chemical bottles, or other items which require replacement as a 

result of ordinary usage.

To obtain warranty service for the Flexi Pro Sprayer, contact your 

distributor or Hydro-Force. If the sprayer must be returned to Hydro-

Force or an authorized service center, the purchaser shall prepay shipping 

charges for products returned for warranty service. All returns must have 

a Return Authorization number, issued by Hydro-Force, clearly marked on 

the exterior of the package. No returned items will be accepted by Hydro-

Force without prior authorization.

Hydro-Force makes no other warranty, either expressed or implied, with 

respect to this product.

The remedies provided herein are the purchaser’s sole and exclusive 

remedies. In no event shall Hydro-Force be liable for any direct, indirect, 

special, incidental, or consequential damages.

This warranty gives you specific legal rights. You may also have other rights 

which vary from jurisdiction to jurisdiction.

12 Volt Electric Sprayer

F

LEXI

 

PRO

S P R A Y E R

F���� 

PRO

S P R A Y E R

by

Summary of Contents for FlexiPro AS76









Reviews: